Which one of the following is true regarding VLANs?
Options: Two VLANs are configured by default on all Cisco switches., VLANs only work if you have a complete Cisco switched internetwork. No off-brand switches are allowed., You should not have more than 10 switches in the same VTP domain., VTP is used to send VLAN information to switches in a configured VTP domain.
The Corporate router receives an IP packet with a source IP address of 192.168.214.20 and a destination address of 192.168.22.3. Looking at the output from the Corporate router, what will the router do with this packet? Corp#sh ip route [output cut] R 192.168.215.0 [120/2] via 192.168.20.2, 00:00:23, Serial0/0 R 192.168.115.0 [120/1] via 192.168.20.2, 00:00:23, Serial0/0 R 192.168.30.0 [120/1] via 192.168.20.2, 00:00:23, Serial0/0 C 192.168.20.0 is directly connected, Serial0/0 C 192.168.214.0 is directly connected, FastEthernet0/0
Options: The packet will be discarded., The packet will be routed out the S0/0 interface., The router will broadcast looking for the destination., The packet will be routed out the Fa0/0 interface.
The "walk-through" method of programming a robot involves:
Options: walking through your suggested procedure with your supervisor prior to programming, physically moving the robot through all the motions it is to repeat, moving the robot from one location to another, All of the above.
6.In virtual memory management, when local control policy is applied
Options: (A)It determines the number of processes that are to be resident in main memory. (B) It determines the number of processes that are to be resident in virtual memory. (C) It determines when a modified page should be written out to secondary memory. (D) None of these. 9