Which of the following statements are true regarding the command ip route 172.16.4.0 255.255.255.0 192.168.4.2? The command is used to establish a static route. The default administrative distance is used. The command is used to configure the default route. The subnet mask for the source address is 255.255.255.0.
Options: 1 and 2, 2 and 4, 3 and 4, All of the above
3.What is the primary difference between a pivot table report and a cross tab query?
Options: (A)A pivot table report can contain sums, counts, and averages while a cross tab query cannot. (B) You canâ€™t pivot a cross tab query (C) A cross tab query lets you group similar items. A pitot table report does not (D) None of above 1
Options: (A)It is the process of modifying the state space of the system so that the effects of the fault are minimized and system can continue in operation in some degraded state. (B) Capacity of a system or component to continue normal operation despite the presence of hardware or software faults. | 103 (C) It is the widely used hazard technique (D) Incorrect step, process, or data definition in a computer program 20
When referring to instruction words, a mnemonic is:
Options: a short abbreviation for the operand address, a short abbreviation for the operation to be performed, a short abbreviation for the data word stored at the operand address, shorthand for machine language
Options: (A)The low-level components of a system are integrated and tested before the higher-level components have been developed. (B) The testing process starts with modules at lower levels in the hierarchy and works up the hierarchy of modules until the final module is tested. (C) An event driven control system, where an event is broadcasted to each subsystem and any sub-system that can handle that event responds to it. (D) Control starts of the top of a sub routine hierarchy and through sub routine calls passes to lower levels 13
A p- channel enhancement type MOSFET performs much the same function as a PNP transistor, except that
Options: it operates much faster, it is considerably larger, it is controlled by voltage rather than by current, so that it requires very little current at the control terminal, it is controlled by current rather than by voltage like a bipolar transistor.
The function(s) of the Storage Assignment is (are)
Options: to assign storage to all variables referenced in the source program., to assign storage to all temporary locations that are necessary for intermediate results., to assign storage to literals, and to ensure that the storage is allocate and appropriate locations are initialized., all of the above